Roland Versa Studio BN-20 Printing issue

mr-gobby · Post by **mr-gobby** » 24 Feb 2016, 20:57

Great to hear it's sorted, it's awful having a problem with an expensive bit of kit but great when its a simple fix

Mark

Reading-Print · Post by **Reading-Print** » 24 Feb 2016, 21:08

Yeah well happy it's fixed

Sent from my SM-G900F using Tapatalk

S2DZ · Post by **S2DZ** » 22 Aug 2017, 11:57

Hi,
i have a similar problem. I bougth a second hand BN20

. I changed from eco-sol max to max3. And then we tried the firsts tests. And the print quality is bad, especially the Black print (See attachment). I did all kind of maintenance and cleaning (a lot of material and ink wasted), but until now the situation is the same.

: vB_ID:4790; bn20_000.jpg (39.43 KiB) Viewed 25 times

: vB_ID:4790; bn20_000.jpg (39.43 KiB) Viewed 25 times

: vB_ID:4790; bn20_000.jpg (39.43 KiB) Viewed 25 times

: vB_ID:4790; bn20_000.jpg (39.43 KiB) Viewed 25 times

: vB_ID:4790; bn20_000.jpg (39.43 KiB) Viewed 25 times

ArferMo · Post by **ArferMo** » 22 Aug 2017, 13:25

STAY WELL AWAY from Max3 it dries too quick and blocks the heads, Also problems with media adhesion as it dries so quick it has not got time to bond you need to use media that is designed for Max3.

scotty44 · Post by **scotty44** » 22 Aug 2017, 17:29

Before you changed the carts, was it printing OK? or did you buy it with no carts fitted?

Paul · Post by **Paul** » 22 Aug 2017, 20:58

I believe you need change the firmware before you instal eco sol max3. have you done that?
Dont waste any more ink and media. call ROLAND customer service and tell them what is going on after you upgraded.

S2DZ · Post by **S2DZ** » 23 Aug 2017, 12:39

ArferMo;125404 wrote:STAY WELL AWAY from Max3 it dries too quick and blocks the heads, Also problems with media adhesion as it dries so quick it has not got time to bond you need to use media that is designed for Max3.

Hi ArferMo,
i think is too late to stay away. Now i have to find a solution.

S2DZ · Post by **S2DZ** » 23 Aug 2017, 12:46

scotty44;125413 wrote:Before you changed the carts, was it printing OK? or did you buy it with no carts fitted?

Hi scotty44,
I bought with no carts fitted and was missing the waste ink tank.

S2DZ · Post by **S2DZ** » 23 Aug 2017, 13:14

Paul;125416 wrote:I believe you need change the firmware before you instal eco sol max3. have you done that?
Dont waste any more ink and media. call ROLAND customer service and tell them what is going on after you upgraded.

Hi Paul,
i did all the steps required by roland to install eco-sol max3.

Paul · Post by **Paul** » 23 Aug 2017, 20:43

S2DZ;125424 wrote:Hi Paul,
i did all the steps required by roland to install eco-sol max3.

call them, and tell them your results. only coz your printer second hand no mean you will be left with no help. I found ROLAND very helpful.

DSF

DSF

Roland Versa Studio BN-20 Printing issue

Re: Roland Versa Studio BN-20 Printing issue

Re: Roland Versa Studio BN-20 Printing issue

Re: Roland Versa Studio BN-20 Printing issue

Re: Roland Versa Studio BN-20 Printing issue

Re: Roland Versa Studio BN-20 Printing issue

Re: Roland Versa Studio BN-20 Printing issue

Re: Roland Versa Studio BN-20 Printing issue

Re: Roland Versa Studio BN-20 Printing issue

Re: Roland Versa Studio BN-20 Printing issue

Re: Roland Versa Studio BN-20 Printing issue

Who is online