Reject % per box

Specifically for mug presses & ovens
Markus_Mleko
Posts: 17
Joined: 29 Nov 2014, 21:32
Contact:

Re: Reject % per box

Post by Markus_Mleko »

Hi folks,

Apologies if this has been covered before, but I didn't find anything in my search.

Can I ask roughly how many (if any!) poor/unusable mug blanks people expect to get on average in a box of 36? I'm only a few boxes into my sublimation career and am trying to work out how high to set my expectations..

Ta!
ArferMo
Posts: 1061
Joined: 24 Jun 2014, 22:40
Contact:

Re: Reject % per box

Post by ArferMo »

Zero..... None.
socialgiraffe
Posts: 4597
Joined: 16 Jun 2011, 23:40
Been thanked: 1 time
Contact:

Re: Reject % per box

Post by socialgiraffe »

As above, didley squat (unless it prints upside down, which is obviously a faulty mug :wink:)
USING: Whatever it takes to get the job done...
ArferMo
Posts: 1061
Joined: 24 Jun 2014, 22:40
Contact:

Re: Reject % per box

Post by ArferMo »

Or you forget to mirror the image :mad:
User avatar
Quinsfan
Posts: 1213
Joined: 13 Nov 2013, 15:50
Contact:

Re: Reject % per box

Post by Quinsfan »

or the mugs taper.
Many thanks
Iain

Equipment used A4 Ricoh printer, HP3085 Heat Press Graphtec cutter, Jarin mug press, CJV 30-60 solvent printer and lots of help from DSF.
phoenixalpha
Posts: 421
Joined: 12 Aug 2010, 21:08
Contact:

Re: Reject % per box

Post by phoenixalpha »

Everytime I order from BMS, zero (or essentially zero - I'm sure I've had a few in the 1000s of mugs over the years). Others.... well I wont name names but I've had half a box entirely smashed on arrival from one supplier, I've had another from another supplier where a full 13 of 36, the handles pinged off as soon as you put pressure on them and the other 23 went back to the supplier with hairline cracks down the insides of the mugs. I could go on but I only ever get my mugs from BMS whenever I order.
FutureProject
Posts: 175
Joined: 07 Dec 2013, 15:49
Contact:

Re: Reject % per box

Post by FutureProject »

I get mine from signzworld and have had none till the last box which I think was dropped as there's about 4 without handles and one with a chip. hope it's a one off.
pisquee
Posts: 4360
Joined: 05 Nov 2011, 17:33
Contact:

Re: Reject % per box

Post by pisquee »

ArferMo;99025 wrote:Or you forget to mirror the image :mad:
Can you not set your print driver to do this as its default setting?
pisquee
Posts: 4360
Joined: 05 Nov 2011, 17:33
Contact:

Re: Reject % per box

Post by pisquee »

We get ours from Raja and delivered by Pallet. Very rarely any breakages or faulty/unusable mugs, and any number we report as such are added to the next pallet load we get in as replacements.
One thing I have noticed when buying other mugs from other suppliers, that some of the extra cost paid for more expensive mugs does seem to relate to the quality (durability, strength) of the packaging used to ship and protect them.
ArferMo
Posts: 1061
Joined: 24 Jun 2014, 22:40
Contact:

Re: Reject % per box

Post by ArferMo »

pisquee;99033 wrote:Can you not set your print driver to do this as its default setting?
I've got 14 or 15 printers here and if someone has been messing about and I'm not paying attention then sometimes it happens.... they end up in the welfare box :redface:
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest