Reject % per box
-
Markus_Mleko
- Posts: 17
- Joined: 29 Nov 2014, 21:32
- Contact:
Re: Reject % per box
Hi folks,
Apologies if this has been covered before, but I didn't find anything in my search.
Can I ask roughly how many (if any!) poor/unusable mug blanks people expect to get on average in a box of 36? I'm only a few boxes into my sublimation career and am trying to work out how high to set my expectations..
Ta!
Apologies if this has been covered before, but I didn't find anything in my search.
Can I ask roughly how many (if any!) poor/unusable mug blanks people expect to get on average in a box of 36? I'm only a few boxes into my sublimation career and am trying to work out how high to set my expectations..
Ta!
-
socialgiraffe
- Posts: 4597
- Joined: 16 Jun 2011, 23:40
- Been thanked: 1 time
- Contact:
Re: Reject % per box
As above, didley squat (unless it prints upside down, which is obviously a faulty mug
)
USING: Whatever it takes to get the job done...
Re: Reject % per box
or the mugs taper.
Many thanks
Iain
Equipment used A4 Ricoh printer, HP3085 Heat Press Graphtec cutter, Jarin mug press, CJV 30-60 solvent printer and lots of help from DSF.
Iain
Equipment used A4 Ricoh printer, HP3085 Heat Press Graphtec cutter, Jarin mug press, CJV 30-60 solvent printer and lots of help from DSF.
-
phoenixalpha
- Posts: 421
- Joined: 12 Aug 2010, 21:08
- Contact:
Re: Reject % per box
Everytime I order from BMS, zero (or essentially zero - I'm sure I've had a few in the 1000s of mugs over the years). Others.... well I wont name names but I've had half a box entirely smashed on arrival from one supplier, I've had another from another supplier where a full 13 of 36, the handles pinged off as soon as you put pressure on them and the other 23 went back to the supplier with hairline cracks down the insides of the mugs. I could go on but I only ever get my mugs from BMS whenever I order.
-
FutureProject
- Posts: 175
- Joined: 07 Dec 2013, 15:49
- Contact:
Re: Reject % per box
I get mine from signzworld and have had none till the last box which I think was dropped as there's about 4 without handles and one with a chip. hope it's a one off.
Re: Reject % per box
Can you not set your print driver to do this as its default setting?ArferMo;99025 wrote:Or you forget to mirror the image
Re: Reject % per box
We get ours from Raja and delivered by Pallet. Very rarely any breakages or faulty/unusable mugs, and any number we report as such are added to the next pallet load we get in as replacements.
One thing I have noticed when buying other mugs from other suppliers, that some of the extra cost paid for more expensive mugs does seem to relate to the quality (durability, strength) of the packaging used to ship and protect them.
One thing I have noticed when buying other mugs from other suppliers, that some of the extra cost paid for more expensive mugs does seem to relate to the quality (durability, strength) of the packaging used to ship and protect them.
Re: Reject % per box
I've got 14 or 15 printers here and if someone has been messing about and I'm not paying attention then sometimes it happens.... they end up in the welfare box :redface:pisquee;99033 wrote:Can you not set your print driver to do this as its default setting?
Who is online
Users browsing this forum: No registered users and 1 guest
