First Photo Slate what do you think??

[marksbananas]

if i print the image not using powerdriver it prints fine, its only when it is printed through powerdriver

[FairyD]

Mark....have you printed it out on a normal printer?! Does the same thing happen on a normal inkjet!

It is a bit strange how it's concentrated on just one area....could it have been affected with moisture/glue or something!??!

I can try printing it out here if you want to send me it over see if I get the same result?!!?

[marksbananas]

inh photo shop i go to edit image size and put the size i want the image and make sure the resolution is 300dpi, the orginal is 72dpi, but even if i dont effect the dpi and leave it at the 72dpi it prints the same i have unistalled all driver and reinstalled and as long as i dont print in pwerdriver it is fine, not sure but think there is something with a setting somewhere but i cant find where

[marksbananas]

Mark....have you printed it out on a normal printer?! Does the same thing happen on a normal inkjet!

It is a bit strange how it's concentrated on just one area....could it have been affected with moisture/glue or something!??!

I can try printing it out here if you want to send me it over see if I get the same result?!!?

I have printed on normal paper through a normal printer and its fine, the paper image out of the ricoh even has the blocks on it i ahev attached the image of the paper out of the ricoh, normal printer has been fine

[marksbananas]

found the problem turned off colrsure and its fine

[marksbananas]

the image doesnt come out as well now though when pressed the first one with the blocks was really glossy and had a nice look this one without the colorsure on comes out quite dull

[marksbananas]

any tips on how to get it glossy, my first one came out glossy but now i have solved the problem it is coming out the press matt finish

[marksbananas]

Been testing all day and been to asda and got thinner backing silcone sheet and still the image comes out on the slate as dull matt finish, i must be doing something worng but i have tried all day with diferent settings and still comes out dull and matt, first one i ever did was nice and glossy but not had that effect since really going round in circles now

[Justin]

Not sure how much difference it makes but I print mine with a felt pad on top not silicon.

[marksbananas]

yeah i have treid alsorts, the print comes out the printer should it be quite faint or strong image? as mine are coming out quite faint