Stray ink on Mug after Sublimation

[Jaydeep1726]

Hi Everyone,

since last couple of days I am getting inks on mugs after sublimation. I didnt change anything like paper, ink, printer or mug press. After printing i am waiting for ink to dry on paper. Any idea you guy suggest me ?

vB_ID:4892

2B6E54B0-CF62-41BC-B1D6-C2A21AD5C508.jpg (26.34 KiB) Viewed 41 times

vB_ID:4892

2B6E54B0-CF62-41BC-B1D6-C2A21AD5C508.jpg (26.34 KiB) Viewed 41 times

vB_ID:4892

2B6E54B0-CF62-41BC-B1D6-C2A21AD5C508.jpg (26.34 KiB) Viewed 41 times

Regards,
jay

[Justin]

What mugs and paper are you using?

[Jaydeep1726]

What mugs and paper are you using?

Thank you Justin for your reply.

I am using signworld mugs and cityinkexpress paper. Also ink from cityinkexpress.

I have also played with different temperature and time.

Regards,
Jay



Sent from my iPhone using Tapatalk

[Justin]

Times and temps won't help, it's finding this ink from somewhere. if the ink isn't visible after printing it sounds like somethings happening during the print process.

I would advise you try a better paper, Trupix for example. Also, I'd be looking at changing those mugs personally. that doesn't help much much for now.

What printer/inkset are you using? Is the additional ink definately not showing on the print? Are you allowing it to dry?

[James990]

I have had this before, sometimes you just cannot see it on the print. It went after a while, I believe, for me anyway, it was ink that had dropped onto the rollers, and as I said even though I looked at the print couldn't see it.

Are you sure you have the mug clamped up tight to stop any ink leaking along??

[John G]

Try a head clean, it may be a fine mist that you cannot see on the paper.

[Jaydeep1726]

I have had this before, sometimes you just cannot see it on the print. It went after a while, I believe, for me anyway, it was ink that had dropped onto the rollers, and as I said even though I looked at the print couldn't see it.

Are you sure you have the mug clamped up tight to stop any ink leaking along??

Thank you james for your reply.
I am using pneumatic mug press and all look okay to me.
I am getting on some mugs not on all mugs.


Sent from my iPhone using Tapatalk

[Jaydeep1726]

Try a head clean, it may be a fine mist that you cannot see on the paper.

Thank you john.
Yes I tried that many times but no luck [emoji17]


Sent from my iPhone using Tapatalk

[Jaydeep1726]

Times and temps won't help, it's finding this ink from somewhere. if the ink isn't visible after printing it sounds like somethings happening during the print process.

I would advise you try a better paper, Trupix for example. Also, I'd be looking at changing those mugs personally. that doesn't help much much for now.

What printer/inkset are you using? Is the additional ink definately not showing on the print? Are you allowing it to dry?

Thank you Justin. I will try on durham orca coated mug and with new paper which i order from ink express.
I am using ricoh printer 3110dn. Ink from cityinkexpress. Yes i am allowing atleast 10 minutes to dry.


Sent from my iPhone using Tapatalk

[mrs maggot]

We used 144 Signzworld mugs recently, we had one with a chipped handle, all printed up really well, nice finish to them, no spotting, and used the smaller handle ones.