artwork help (engraving)

[jennywren]

I do engraving and would like to put the images on our website, but if I take a picture of a lighter the image is blighted by light bouncing of the lighter, I've scrubbed around that and trying for a different approach, I want to put the image of the engraving but need to be a reasonable picture but also of a low quality that they can't copy it as the line drawer I have done take hours to do.

[Paul]

You will need to bounce off the flash of the sealing or back wall. Otherwise you will only get dark image with flash flare in it

[jennywren]

You will need to bounce off the flash of the sealing or back wall. Otherwise you will only get dark image with flash flare in it

I going to take pictures of the line drawing and put it next to the zippo, tankard, glass and anything else that I engrave, this way it will save me engrave all the items that I do, the same image can on various things so I've decided to take a image of my line drawing to show what it would like. But I don't want the image to be clear to be copied.

[daviddeer]

Try slicing the image in photoshop or fireworks and importing the html.