DSF

Does anyone have a template for the wooden crosses. They have a ovel coaster style that you print on that fits in the cross. Are they the same temp and press times we use for coaster. Found some in a cupboard and thought I would use them, won't earn money in a cupboard

Are these the UniSub crosses? There may be a template available if they are. As for temp and dwell times, if they are the same material as the coasters then the temp is 190-200 degrees C for 50 - 60 seconds. If they've been in a damp place for a while (not suggesting your cupboard is damp!) then press them upside down for 30 seconds to get rid of the moisture.

Yes they are UniSub, never thought about the damp, but no our house is cold so cold but not damp but if you have a template I would be so greatful

http://www.unisub.com/templates/templates_main.html

http://www.conde.com/templates.php

Possibly something on one of these sites?

Justin

In fact, is this the one?

http://www.unisub.com/templates/updated%20Template%20Drawings/5783--cross-plaque-insert+cross.eps

http://www.unisub.com/templates/updated%20Template%20Drawings/5783--cross-plaque-insert+cross.cdr

Justin

I use photo shop and had a look at all of them but would not transfer to a template any ideas, thanks for all the adive.

Was that the right shape cross? If so, do you just need an outline?

Justin

It was the right cross but the whole thing down loaded coaster, cross and all. I neeed the outline for the coaster bit. Can you help.

http://www.tjlewis.co.uk/cross_outline.cdr

Is that what you need?

Justin

I can't open this as its in croal draw, I just need the coaster template that fits in to the cross