DSF

My first print resulted in disaster, im trying to heat press a mug, Epson print set to photo best and mat paper, 240degrees at 4o seconds what have i done wrong?
The picture came out really dull and faint

lower the temp to 180 degrees and up your time 180 seconds.

Make sure the press is set on Centigrade.

Jack

JackB;46528 wrote:Make sure the press is set on Centigrade.

Jack

I have now set press to 240 and for 180 seconds and still the prints are dull.
When they are printed they are dull, maybe here lies the problem.
I am useing heat sub paper with epson p50, i have tried setting the paper to matt and photglossy, set to best photo and still very dull when printing am now stumped.

Reg;46527 wrote:lower the temp to 180 degrees and up your time 180 seconds.

Lower the temperature.

temp is way to high bud - 180-190c for 180sec - and yes, make sure its in centigrade
refer to your manual

what kind of paper are you using bud ?

and -
are you printing on the right side of the paper ???????

...and is color enhance off?

paper is kalon temp set at 180 degrees time 180 seconds, image printed via photoshop, printer set to photo, plain paper, printing the white side.

plugy;46532 wrote:When they are printed they are dull, maybe here lies the problem.

They will be dull on the paper until heat pressed.

Is photoshop menages colorsor printer???