Going to get a hammer!

[TimShirt]

This is driving me crazy...The print is good i can not get a good pic on the mug...I think it is the mug press...I have tried different times and heat cobinations but it not doing it...Is there anyone in Hampshire that could help me please?

[chrissydd]

Hope you don't mind me following this thread. I'm also having difficulties and would be interested in any advice you get. I'm using an adkins mug press so I'm confident this isn't causing my blurry images. I'm told 180 degrees for 180 sec and to make sure my mugs are room temperature before using them... but still have no joy

[Scotty@BMS]

Which printer and paper are you using? And which mugs come to that?

[chrissydd]

I feel I'm hijacking this post...sorry TimShirt! I'm using ricoh 3110DN with Orca mugs, text print paper...any thoughts?

[soulclaimed]

with texprint follow the times on the guide sheet that comes with the paper, texprint r especially requires a longer pressing timehttp://www.jsisigns.com/product_TPR1319-110_13 ... et-pk.html

[chrissydd]

CRIKEY... it says 4 minutes at 204c!!! here goes....

[chrissydd]

Holy moly Soulclaimed... just put a mug in for 6 minutes and the results are MUCH better!!! I disregarded the paper instructions after reading everywhere (and from adkins) that 180 s was the way forward...I so happy I could hug you!!!!THANK YOU for taking the time to help :):):):):):)

[soulclaimed]

no problem happy to help

[technick]

Can i borrow your hammer?

[mags1892]

with texprint follow the times on the guide sheet that comes with the paper, texprint r especially requires a longer pressing timehttp://www.jsisigns.com/product_TPR1319-110_13 ... et-pk.html

Thats suprised me too Soulclaimed nice one good reason to change paper production would pretty much slow down lol.