Page 1 of 1
Re: Graphtec CE6000-40 problem
Posted: 06 Sep 2015, 13:33
by kermit
I have an image in coreldraw x7 which I have a cutline around (simple circle shape). I add reg marks and send to cutter. The problem I have is when I cut it doesn't cut where I expect. It is only just off where it should be but I don't know why!
Any help would be appreciated.
Keith
Re: Graphtec CE6000-40 problem
Posted: 07 Sep 2015, 09:52
by logobear
are you doint the 3 point registration with the tip of the cutter blade?
do you have the MEDIA IN THE CORRECT WAY ROUND?
P
Re: Graphtec CE6000-40 problem
Posted: 07 Sep 2015, 18:17
by kermit
logobear;104274 wrote:are you doint the 3 point registration with the tip of the cutter blade?
do you have the MEDIA IN THE CORRECT WAY ROUND?
P
yes to all of the above. It turned out my cutter was set to rotate! Only had it 2 weeks & not been in the menu until speaking to Graphtec today. Cutting everything perfect now.....loving the CE6000-40
Re: Graphtec CE6000-40 problem
Posted: 13 Sep 2015, 23:12
by mags1892
You can run a registration calibration on these , Im a graphtec reseller in newcastle. GLad youre sorted theyre fantastic machines.