DSF

caca;151027 wrote:Hello, yes colour management is turned off all the time. I always turn it off before printing.

Have you checked that colour management is not turned back on when you click on the 'A3 glossy' preset?

Yes i know and noticed that before so when i printing i check if its turned off all the time.

Doesn't look to me as thought you're using the profile in those images? You also have wrong settings.

I am using ICC profile that my supplier gave me but this profile do not help me to get good result even worst colors than if i only use as an ICC epson l1800 series photo glossy and choose in the settings paper type photo paper glossy but its still not good result. I also attach photos on the left how it should be as i am making 2d cases with sublimation paper for couple years and on the right how i get with sublimation film and sublimation machine on 3d case. What settings should i choose?

[ATTACH=CONFIG]6967[/ATTACH]

Show me this screen and also the other tabs.

Can you see it?

Yes, you're on glossy which is incorrect. Other tabs?

Attach other tabs options

These two tabs?

[ATTACH=CONFIG]6970[/ATTACH] [ATTACH=CONFIG]6971[/ATTACH]

attach photos