smal, 10oz or less mugs - bone china or earthenware

[Andrew]

Balmoral is probably suited as mentioned above. Can mugs are a good option if you need less volume although they are a little taller.

[arthur.daley]

Balmoral is exactly what I wanted but couldn't get any. I tried to convince them that the tall bone china mugs would look good but to no avail (

[Andrew]

I have printed Balmoral on sublimation a few times. Can't remember where I got them but probably wasn't one of the main steam suppliers. Might be one of my bulk suppliers.

[spongerobinson]

i notice the magic touch do 8oz balmoral mugs...says they are dishwasher proof but doesn't mention what the coating is, so I've no idea if they'd suit or not.

[arthur.daley]

hi Andrew

If you have any idea which of your bulk suppliers it might have been I'd be grateful to hear who it may have been.

[arthur.daley]

i notice the magic touch do 8oz balmoral mugs...says they are dishwasher proof but doesn't mention what the coating is, so I've no idea if they'd suit or not.

I am 99.9999% sure I contacted TMT and either they didn't have any in stock, or they were unavailable or not suitable, can't remember which!! I have contacted sooooooo many suppliers

[Andrew]

It is likely to be a mug supplier who only sells by the pallet as I know it's not the regular subli one's after checking. I might have a box or so left but otherwise it would need to be part of a full pallet order. I will check tomorrow.

Not sure why the subli suppliers don't do them as it is a good mug for this type of printing.

[arthur.daley]

several suppliers do them but they just don't have any at the moment (