Photo gift business for sale

[smo]

So....anyone going to own up...who bought it?

[JackB]

So....anyone going to own up...who bought it?

OK I will start it off. It wasn't me. only another 2 thousand members to go. lol

Jack

[Maccbean]

To be honest, I wish I'd discovered this forum 5 years ago when I started dye subbing myself. It would have answered loads of questions that I spent hours researching, and I would have had friends in common.

I am moving on to realise an ambition of cooking for a living. Opening a wine bar serving food with a Scandinavian influence. Very different, and I can't wait!

[Maccbean]

So....anyone going to own up...who bought it?

Well, my lips are sealed, but I'm sure you'll find out very soon.

[purpledragon]

In the imortal words of the great poet that is toyah "it'sth a mysthtry"

[purpledragon]

So....anyone going to own up...who bought it?

ok guilty as charged im am now the proud owner of mybiggerpicture.com with an feckin huge epson 9400 and a feckin huge geoknight press and an even huger heatjet roller press

[bms]

ok guilty as charged im am now the proud owner of mybiggerpicture.com with an feckin huge epson 9400 and a feckin huge geoknight press and an even huger heatjet roller press

Didn't think you could keep quiet Brett!

[pisquee]

We have the same heatjet model ... am struggling to get it up and running though (had for a few weeks) as it keeps tripping the RCD - firstly the 30mA one on the main ringmain, then I rewired in its own 16 amp feed, so it was fed fromthe main incomer which still had an RCD, although rated at 100mA, and in doing this meant I could keep it running for 5 minutes, rather than 5 seconds I got on the 30mA - we're now considering having to buy a generator to run it, as I am uncomfortable doing too much rewiring as we're only renting!

[smo]

ok guilty as charged im am now the proud owner of mybiggerpicture.com with an feckin huge epson 9400 and a feckin huge geoknight press and an even huger heatjet roller press

Pipped me to it!!

Congrats on the purchase (you just became public enemy number 1 )

[purpledragon]

We have the same heatjet model ... am struggling to get it up and running though (had for a few weeks) as it keeps tripping the RCD - firstly the 30mA one on the main ringmain, then I rewired in its own 16 amp feed, so it was fed fromthe main incomer which still had an RCD, although rated at 100mA, and in doing this meant I could keep it running for 5 minutes, rather than 5 seconds I got on the 30mA - we're now considering having to buy a generator to run it, as I am uncomfortable doing too much rewiring as we're only renting!

had exactly the same problem i had to get sparky to wire from mains a new dedicated 32amp fuse board in my work shop. Running a treat now