Hi

[seppo]

I have few presses, from coralgraph. Now i need to press 90 x 200 millimeter images and coralgraph press dont press it good on the corners.

Can you help me, i need to buy good mugpress, suitable to maximum images.
Links, pleace...

seppo, finland

[bms]

I have few presses, from coralgraph. Now i need to press 90 x 200 millimeter images and coralgraph press dont press it good on the corners.

Can you help me, i need to buy good mugpress, suitable to maximum images.
Links, pleace...

seppo, finland

Will increasing the pressure not solve the problem of the edges? How thick is the 90mm x 200mm item?

[seppo]

Its 10oz mug, increasing the pressure, same result...

[bms]

Its 10oz mug, increasing the pressure, same result...

Sorry I didn't realise this was a mug. What temp and time are you pressing for and what printer/ inks are you using?

[seppo]

inc comes feom coralgraph, have no idea of brand. Epson 4-colour printer, S22 i know i could have better one

[bms]

inc comes feom coralgraph, have no idea of brand. Epson 4-colour printer, S22 i know i could have better one

We need to know your temp / times please. Lack of colour in the corners might be because of the thickness of the mug, temp, temp & time or pressure.

[seppo]

i put the mug in cold press, waiting temperature rising to 180 celcius. When it is 180, i pull down a switch and 30 sec countdown to be ready. Thats the manual i got from cg.

[bms]

i put the mug in cold press, waiting temperature rising to 180 celcius. When it is 180, i pull down a switch and 30 sec countdown to be ready. Thats the manual i got from cg.

i would increase your time to 150 seconds. If colours then look over cooked reduce temp to 175.

[seppo]

ok, i try that tomorrow

[viccar]

I have the coral 4 press and ricoh and use 170 and 150 mins.