bar runners

[bigj2552]

friend asked me to do these for his pub, when i get up and going.

can i print these with either epson b1100 or the brother mfc 5890cn A3 printer ?
why do i ask ?
cause it says this on the suppliers site i want to buy from -

"Top quality rubber backed bar runner with bonded fabric surface available in 1.5 mm and 3 mm thickness for dye sublimation printing. Size 45 cm x 22 cms.

Please note that you require Super A3 size paper for an all over print on these bar runners".


cheers


johnny
[h=1][/h]

[Andrew]

If you need Super A3 then I doubt A3 standard printer will do the job.

[bigj2552]

If you need Super A3 then I doubt A3 standard printer will do the job.

I wouldnt have thought a bar runner requires that size of print ????...

surely you can do it on an A3 printer ?

anyone ever done these before ?...can anyone confirm this printing size ?..seems hell of a big !

[John G]

You've stated that the runner is 45 cm x 22 cm and A3 is [CENTER]420mm x 297 mm

So you'll be 3cm short on the length, or you design it with a border and size the print to fit. [/CENTER]

[purpledragon]

b1100 prints a3+

[bigj2552]

b1100 prints a3+

aye...by jingo, so it does lol......

[purpledragon]

It probably recommends an a3 + printer as printers do tend to allow for a border and to be honest borderless printing can bring its own hasstles, i print the bar runners and pet mats on a3+ at least then i dont have to adjust settings etc to alow for borderless printing