Problem printing cufflinks

[proprints]

Hi i wonder if anyone can suggest the best way to print cufflinks (time/temp/pressure)

I have ruined quite a few pairs because the picture is coming out very faint. I also have the same problem with zippo style lighters.

Thanks
Steve

[Paul]

may be help if you tell us first your settings. so we may be able to adjust them a bit. are those cufflinks are aluminium inserts??

[proprints]

yes, they are the aluminium ones.

tried to print them upside, downside, always roundabout 190 for 60secs, light pressure, heavy pressure.
Thanks
Steve

may be help if you tell us first your settings. so we may be able to adjust them a bit. are those cufflinks are aluminium inserts??

[Paul]

I do my metal same as you. 190C for 60sec. but i found some alluminum need 200C.

[ASO Embroidery]

Hi Steve
Not sure about the cufflinks as i do the same as paul and never seem to have any probs. With regards your zippo lighter problem I refer you to the hints and tips section and one of the earlier posts and my reply sorry not sure how to get a link to it hope this helps

Regards

Sammy

[proprints]

I think I will try these again in the new year