Epson B1100 - not printing at all

[R.Prints]

The reason I asked about the lid is because I found that the B1100 must have a microswitch fitted cos if you lift lid when printing the printer will stop, then start again when you close lid, unlike the R1800's I had previously where you could leave the lid open.

[Paul]

The reason I asked about the lid is because I found that the B1100 must have a microswitch fitted cos if you lift lid when printing the printer will stop, then start again when you close lid, unlike the R1800's I had previously where you could leave the lid open.

good poin. here its how to overcome this problem


use one of the rubber ciss plug