Epson 1500W spitting out the paper

[Ravisteam]

Guys I have change my paper to a different one and my Epson 1500W just started spitting out the paper all of a sudden .I dont know his is down to the paper ( changed to a different paper but it still doing it ) . It take the paper as normal and does not hold it to print instead just put it out .This is really annoying .Tried cleaning rollers etc but no luck .Rearly print a one but 99.99 spit it out ..Any suggestions guys . I am not families with the internals so cannot figure out why its happening specially why its not holding the paper ..Any advice pls ..

[webtrekker]

Might be the paper edge sensor but I've never owned this brand of printer before.

[Ravisteam]

Might be the paper edge sensor but I've never owned this brand of printer before.

Thanks I thought the same some sort of a sensor not detecting the edge of the paper ..Dont know how to get it sorted tho ..Nothing comes up on google ..

[voodoopupp]

Unfortunately I have exactly the same problem:
bought the Epson ET-14000 because of this forum and the good results and opinions to Epson printers for starting sublimation...
The printer is "brand new" - bought in September and made only about 100-200 prints yet.
But because it is "redesigned" to sublimation, there is no possibility to use the warranty etc.

Our problem:
We want to print paper for mugs (already cutted to ~ 24 x 10 cm) - Paper is TexPrint-R Mug Sheets

Example:
I am sending 10 print jobs to the printer and he prints the first one without problem, then after that he spits out one blank sheet -> "no paper" error.... -> I press feed, he feeds the paper, but once again a blank sheet and so on. After some blanks it will work again, then he is perhaps printing 2 in a row and the same "no paper" error happens again.

So in the end to print these 10 jobs he spits out about 30-50 blank sheets and I have a lot of manual work to get the jobs done by always pressing this damn feed button.
I have to stay at the printer and I cannot do anything else during the print jobs. And also costs a lot of time!

This is so annoying and really drives me nuts!

Any more suggestions here? Where to find the paper edge sensor?

regards
Voodoopupp