Passport covers

[GoonerGary]

We gave up on passport covers, as the seconds rate was too high, so outsourced them to giftflow/solejuice

How much do they charge for a Pictaleather passport holder? And an 11oz mug? You need to register to see prices. Thanks!

[pisquee]

Can't remember off the top of my head - was easy to register. Same guy as used to be MarvelPress/Artainium IIRC

[cook_58]

I’ve emailed subliblanks but so far no reply

Did they get back to you?
In the end I haven't tried one of the passport holders not very confident of them working out, isub are sending me out replacements and I have also got holders from Xpres https://www.xpres.co.uk/p-10092-pu-pass ... xpres.aspx and shall be trying one later today. Xpres are usually very good so I'm hopeful these holders shall be fine.

[cook_58]

I’ve emailed subliblanks but so far no reply

My plan changed, i tested one from xpres it worked okay, but i think I'd need to have a wee play about for it to be better... reason i only done one, was because isub supplies sent me the ones i was using before hand, and for me they print perfectly.

If you can try get those from isub supplies.
They look exactly like the ones you got except, the come individually wrapped, they're larger (20.2cm x 14.3cm) and they have a carboard insert where the card pockets are.

If you get them, give me a shout and i'll tell you how i press onto them.

Sent from my SM-N960F using Tapatalk

[Bex]

Sorry for the late reply. They told me to reduce the temperature and time which still didn’t work and caused a patchy print. I’m glad to hear you’re getting good results with the iSub covers, I’ll get a few next time I place an order with them. Thank you so much for your help, I really appreciate it

[cook_58]

Sorry for the late reply. They told me to reduce the temperature and time which still didn’t work and caused a patchy print. I’m glad to hear you’re getting good results with the iSub covers, I’ll get a few next time I place an order with them. Thank you so much for your help, I really appreciate it

You'd possibly need to increase the pressure when pressing. I do those ones on a medium/high press.

Sent from my SM-N960F using Tapatalk

[cook_58]

Also, if i reduced temp, id be more tempted increase the time on them.

Sent from my SM-N960F using Tapatalk

[GoonerGary]

My plan changed, i tested one from xpres it worked okay, but i think I'd need to have a wee play about for it to be better... reason i only done one, was because isub supplies sent me the ones i was using before hand, and for me they print perfectly.

If you can try get those from isub supplies.
They look exactly like the ones you got except, the come individually wrapped, they're larger (20.2cm x 14.3cm) and they have a carboard insert where the card pockets are.

If you get them, give me a shout and i'll tell you how i press onto them.

Sent from my SM-N960F using Tapatalk

You had success with both the Xpres and current iSub holders? Whose holder is the Scottish holder printed here?

[cook_58]

You had success with both the Xpres and current iSub holders? Whose holder is the Scottish holder printed here?

This is the isub one in the photo. I havent tried anymore with the xrpres ones since. As i got a few of the isub ones to use.

Sent from my SM-N960F using Tapatalk