BMS Durham 10oz mug

Can't find the right section? Discuss it in here!
GoonerGary
Posts: 2440
Joined: 29 Jun 2010, 16:02
Contact:

Re: BMS Durham 10oz mug

Post by GoonerGary »

Co-incidently, I found two boxes of the BMS budget Durhams in my store cupboard. They are actually Best Sub J.S. Coated mugs and I found them to have zero defects (almost)! Maybe 2-3 out of 72 were not suitable, but that is impressive. These are very straight mugs, the 5013 have a long thin dent around the circumference about 5mm from the bottom of the mug preventing full top to bottom printing.

The only issue with this BMS mug is that I don't think the coating is up to much. It needs a longer time in the oven, half the mug can look faded and full colour prints aren't transferring very well even with 3 minutes extra in the oven. The colours lack contrast and look washed out compared to the 5013 mug. I reckon maybe the coating is a bit thin in places, but right now I've no desire to investigate. The search continues for an easier to print mug.
User avatar
webtrekker
Posts: 2540
Joined: 06 Sep 2016, 13:02
Contact:

Re: BMS Durham 10oz mug

Post by webtrekker »

GoonerGary;138296 wrote:Co-incidently, I found two boxes of the BMS budget Durhams in my store cupboard. They are actually Best Sub J.S. Coated mugs and I found them to have zero defects (almost)! Maybe 2-3 out of 72 were not suitable, but that is impressive.
I use BestSub JS coated 12oz two-tone mugs with spoons and they are excellent, if a bit dearer than the ones I used to buy from The Transfer Press. Two boxes (72 mugs) plus some extra bubble-wrapped stuff attached to the ouside of the boxes arrived completely unscathed from Poland! I haven't tried any of their standard mugs though.
GoonerGary
Posts: 2440
Joined: 29 Jun 2010, 16:02
Contact:

Re: BMS Durham 10oz mug

Post by GoonerGary »

BMS can sell the BestSub 10oz mugs cheaper than BestSub Poland, so maybe ask BMS to get your spoon mugs in for you?
GoonerGary
Posts: 2440
Joined: 29 Jun 2010, 16:02
Contact:

Re: BMS Durham 10oz mug

Post by GoonerGary »

GoonerGary;138019 wrote:I need a similar alternative to the 5013.
So next, I tried two boxes of BMS European Premium RN coated 10oz mugs. I've got an entire box of rejects and quite a few misprints. These were shocking quality.

Next, 72 mugs of Listawood AAA Premium 10oz. These mugs have changed in the last 1-2 years since I last tried them. These new mugs are bigger and are identical to the 5013, but with a much better coating. Very few defects. We have a winner.
User avatar
Justin
Site Admin
Posts: 12090
Joined: 23 Jan 2026, 13:12
Location: Derbyshire
Has thanked: 11 times
Been thanked: 9 times
Contact:

Re: BMS Durham 10oz mug

Post by Justin »

If the AAA mugs are identical to the 5013 they must have changed considerably in the past few months?
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest