Looking for about £75 to anyone near enough Dunfermline as it must be uplifted. If anyone's interested they are welcome to come and try it out first, tea and biscuits will be provided. I have lots more images if anyone wants to see more.
Drawbacks: The counter is stuck at 29 seconds. To change the temperature you have to use a small screwdriver to turn the screw and you don't know what it's at until it stops, if it's too high you have to turn the screw again in increments until you find the good spot. It's rusty on the top but the platten itself is clean. I've used it for vinyl and heat transfers. Haven't used it for sub tshirts but don't see that would be a problem.
Adding in important details I forgot
The platten is 38 x 38cm
It's 98cm long when the drawer is pulled open and is 70cm long when the press is in position to press as the base at the back juts out.
The press is 41cm wide at widest and 41cm tall
- vB_ID:4383
- P1010050.jpg (93.38 KiB) Viewed 9 times
- vB_ID:4383
- P1010050.jpg (93.38 KiB) Viewed 9 times
- vB_ID:4383
- P1010050.jpg (93.38 KiB) Viewed 9 times
