Geo Knight DK20S Displays Err and Beeps at switch on?

[Stitch Up]

Subject says it all really! Our Geo Knight DK20S Displays Err and beeps continually at switch on!

Anyone know of a resolution for this?

I'm planning on taking the board out and soldering all the joints in case it's a dry joint problem.

Cheers

John

[Adrian B]

Check the Temperature sensor wire is plugged in properly first.
http://www.heatpress.net/pdf/dk20sman.pdf

[Stitch Up]

Thanks for that Adrian

Before I read your reply I'd removed the cover exposing the boards, didn't see anything obviously wrong so put it back together. Switched on and 'hey ho', it worked

Cheers

John

[Andysam26467]

We have a DK20S with a dodgy bleeper. When the cycle finishes sometimes it bleeps and sometimes it doesn't. It's a real pain because you have to watch it all the time. I think I'll try looking at the board for loose connections.
Not sure I'm up to soldering joints though lol


Sent from my iPad using Tapatalk