Liyu TC631E cutting problem.

[Kevdog]

Just having a read through the vinyl cutter section to see if I could get some answers to my long time problem.

I have been having this issue for a while an I'm unable to find a cure myself.

Thing is, it seems as if where the cutter starts to cut a font/shape and where is finishes it's not cutting all the way. I have tried the overcut which does overcut but if you look closely you can see a very small section as if its started to cut to early and by the time its finished the cut on the font/shape they don't meet up.

I hope this makes sense as it's the best I can explain. I am using flexi as my cutting program.
I have kind of given up on the machine because of this and now stick to my cameo but i'ts a new machine and a bit of a waste just sitting there as it would save so much time if I could get it working properly.

The machine does this with both sign vinyl and clothing vinyl (worse on clothing vinyl but I gather that's because it's softer)

Hope somebody can help.

[Paul]

try demo http://www.signcutpro.com/download-sign ... ivity-pro/

if it doesn't help than i would say its a driver at fault.

[Kevdog]

Thanks Paul i'll give that a go.

[Kevdog]

Finally gave this a go but still the same[emoji30]


Sent from my iPhone using Tapatalk

[mrs maggot]

when you run the test cut - should be a button on the machine? how does that look ? have you got the blade settings right? have a look at this https://www.youtube.com/watch?v=vq6PlApf7JI

[Paul]

Have you got off set setup corectly? I belive it should be something like 0,250 value

[Kevdog]

when you run the test cut - should be a button on the machine? how does that look ? have you got the blade settings right? have a look at this https://www.youtube.com/watch?v=vq6PlApf7JI

It looks similar although one thing I will say is I have to put my cut pressure way higher than 12g to cut just sign vinyl. Mines will only cut when at 96g.


Sent from my iPhone using Tapatalk

[Kevdog]

Have you got off set setup corectly? I belive it should be something like 0,250 value

I have Paul. I've messed about with this also but still having the same effect.


Sent from my iPhone using Tapatalk

[Kevdog]

It looks similar although one thing I will say is I have to put my cut pressure way higher than 12g to cut just sign vinyl. Mines will only cut when at 96g.


Sent from my iPhone using Tapatalk

Can I ask what make of machine you are using here?


Sent from my iPhone using Tapatalk