<t>I know this is an old post, But just to help anyone else out there, I fit vinyl to trucks and trailers and do get bubbles, inevitable I find unless you are applying to a pristine surface, often I have to remove old vinyl and can clean them up reasonably well - but I regard the odd bubble as ...

<t>Are the prints not actually printing correctly ? if the printer has stood unused then I would expect the print heads to become clogged by dried ink - don't just keep running a clean head cycle(could damage the heads) but physically clean the heads to removed the dried ink !!<br/>
<br/>
Hope this ...

<t>Thanks for the reply, something to have a play with on a slow day, I tend to keep decent size off cuts to use for one offs, small decals and also for quick screen prints !!<br/>
Its useful to know that there is always an alternative when its a long weekend !!<br/>
<br/>
Thanks for the info, much ...

Am I missing a trick here, are you saying that you print onto oracal 651 ??

Decca.

<r><QUOTE author="Mugshots;137302"><s>[QUOTE=Mugshots;137302]</s>Hi Decca. Did you have any luck with this at all please?<e>[/QUOTE]</e></QUOTE>

Hi Mugshots !!!<br/>
<br/>
I did sort it out, the problem I was having was with windows not allowing me to install the drivers for the Goldcut, windows no ...

<t>Hi Guys<br/>
I know its an oldish post but I am looking for a set of drivers for my trusty Goldcut 721. Built a garage to use as a workshop and has been running fine for last couple of years, problem with power and long story short brought it and my desktop home, back into office at back of house ...

Many thanks

I will give it a go - thanks !

Decca

<r>Okay<br/>
Thanks for your time and your input on this, I can use DC direct to power up the SSR but I will lose the temp control as I am effectively taking it out of the loop - I had wondered about replacing this controller with a simpler Temp control unit - looks like the way forward is clear <E ...

Hi again !

Tied both controllers and the results are the same for both :

that is - there is no output on the connections between controller 9&10
there is also none on corresponding connections on the old controller !!

<t>This press came non working, been in workshop about 18 mths waiting for me to look at it !<br/>
<br/>
Had very little use, if any - all looks brand new even now, always considered it was worth keeping if only for spares, but thought it was a worthwhile project rather than scrap it !!!<br/>
<br ...