<t>As I have had a couple of call to check, Yes VAT is included and you get a VAT Receipt so you can claim back the VAT.<br/>
<br/>
Carriage is likely to be £5.99+vat if you take over £250 worth I'll do free P&P<br/>
<br/>
There is no VAT on the childs shirts.<br/>
<br/>
Fruit of the loom T Shirt ...

<r>As some of you already know we are moving to Sunny Folkestone to live by the sea where we have opened a small T Shirt Shop on the Old High Street.<br/>
<br/>
Well we have huge stocks of T Shirts that won't fit into the new shop so here's your chance to Bag a Bargain.<br/>
<br/>
<B><s>[b]</s ...

<t>Loads of letter, som eseem to fit, some seem to be too tight.<br/>
<br/>
It works, I have amanged to do on small piece of Ali Plaque and the results were reasobanle, but as I don't know what I am doing a bit of knowledge will obviuosly produce better results, load of bits and pieces. Must go so ...

<t>This is sold by NOvachrome as sublimation paper for hard items (not Mugs) works very well but we just haev too much of it.<br/>
<br/>
20 Packs to go at £7 per pack plus P&P.<br/>
<br/>
Whilst this works for mugs, I woudl not recommend it as you will get better results with Truepix. We use this ...

<t>LIttle used, only done about 20 items, still in box.<br/>
<br/>
Comes with 2 hoops, loads of threads, rolls of backing. If you collect I'll show you it working.<br/>
<br/>
PE-Design LIte<br/>
<br/>
Bought from BSK in the midlands, very helpfull company and they will supply everything you need ...

Never Used, but we have robbed the light magenta & Yellow ink when we ran low on another printer, the other 4 colours are full open to offers, even if you just haev for the ink, a bargain to be had here.

David

Hi Justin,

Can't reply to your PM just get a 500 message.

DAvid

Send me your email adress again and i'll send ouver your quote

<t>Xpress paper is basically espon matt which should be fine at 200 as we use it all the time on hard stuff at that temp.<br/>
<br/>
TMT unfortunately are low quality mugs, and if using one of their Black presses for mugs they recommend, idle 150 print 190 and time 15 seconds. <br/>
<br/>
This may ...

<r>Be very carefull that the transfer does not move as the press opens as this can cause a blurr in the first couple of seconds whilst everything is at print temp.<br/>
<br/>
Even just opening the press and waiting a few seconds before touching the transfer can make all the difference. We had load ...

Are you using Sublijet or Artanium?

David