Page 1 of 1
Re: Water Bottles using the 3d sublimation machine
Posted: 31 Oct 2014, 16:44
by DANNYD
Hi, Looks like I'm going to get a order in from our local boxing club for the metal water bottles, has anyone used the silicone mould for these, and wondering if i could adapt my Coralgraph mug press to use for now?
Thanks in advance
Re: Water Bottles using the 3d sublimation machine
Posted: 01 Nov 2014, 08:51
by socialgiraffe
Before printing any water bottle do the following...
fill it half full and then drink from it. Do you get more bubbles than water?
It seems that all manufacturers have done something to them as all the ones I have tried are like this.
Re: Water Bottles using the 3d sublimation machine
Posted: 01 Nov 2014, 09:08
by Quinsfan
Are you meaning carbonated bubbles, like a fizzy drink? or just bubbles like when you blow bubbles with a straw?
Hope that makes sense.
Re: Water Bottles using the 3d sublimation machine
Posted: 01 Nov 2014, 09:36
by socialgiraffe
Just good old fashioned bubbles.
Had some complaints because when you drink from the bottle you end up sucking air bubbles.
They never used to be like that, its a recent thing.
S>