DSF

For people using film instead of sublimation paper: wondering where everyone is buying their 3D sublimation film from and if they recommend it.

If so, how much are you paying?

Hi,
I usually buy from a South Korean company. I only use the translucent film from them. Is very good. Never had problems. I used to buy gold film in the beggining because it was cheaper (250 USD/roll), but had problems due to weather conditions and ink not sticking to the film properly. Not sure if it was my fault or really the film quality, but the translucent one is better for me. I buy it with 350 USD per roll, which allows me to print around 500 cases. I can give you their website link, but I'm not sure if I'm allowed here:)

As long as it's not your own website you'd be promoting, it should be fine to share the link

Heather;79286 wrote:Hi,
I usually buy from a South Korean company. I only use the translucent film from them. Is very good. Never had problems. I used to buy gold film in the beggining because it was cheaper (250 USD/roll), but had problems due to weather conditions and ink not sticking to the film properly. Not sure if it was my fault or really the film quality, but the translucent one is better for me. I buy it with 350 USD per roll, which allows me to print around 500 cases. I can give you their website link, but I'm not sure if I'm allowed here:)

You can PM me the link if you'd like. Thanks for sharing the info.

Ok, then. For who wants to check, the adress is www.ujinus.com