Re: need serious help with polymer espresso mugs!
Posted: 13 May 2013, 19:16
hi all,
i got 12 of the polymer espresso mugs plus the puck from BMS this morning, and am having serious trouble getting them to print properly
i've wasted 8 of them so far, and have been at it all day :frown:
have tried the recommended time/temp settings and have been getting very inconsistent results. lines down the print mainly. have also tried upping the time etc. and have also tried a longer time (100seconds) with an added silicone wrap, which has given faded results!
so my questions are, what sorta pressure should i be using for polymer espresso mugs? and what temp/times have people got good results with? also, if adding an extra silicon wrap in, how much should i be looking at upping the time/temp by?
sorry for all the questions, but this is driving me crazy all day and i hope some of you experts may be able to help
thanks
i got 12 of the polymer espresso mugs plus the puck from BMS this morning, and am having serious trouble getting them to print properly
i've wasted 8 of them so far, and have been at it all day :frown:
have tried the recommended time/temp settings and have been getting very inconsistent results. lines down the print mainly. have also tried upping the time etc. and have also tried a longer time (100seconds) with an added silicone wrap, which has given faded results!
so my questions are, what sorta pressure should i be using for polymer espresso mugs? and what temp/times have people got good results with? also, if adding an extra silicon wrap in, how much should i be looking at upping the time/temp by?
sorry for all the questions, but this is driving me crazy all day and i hope some of you experts may be able to help
thanks