DSF

hi guys
just bought a ricoh 3110 printer its still in its box any tips on setting printer up using windows 7 or is it just a case of following the manual

thanks steve

Steve .....just take it step by step. Get yourself a coffee...make time to do it without outside distractions and it's easy (at least setting up my 7700 was).

Good luck

steve 1;62112 wrote:hi guys
just bought a ricoh 3110 printer its still in its box any tips on setting printer up using windows 7 or is it just a case of following the manual

thanks steve

http://www.sawgrasseurope.com/technical ... wer-driver

thanks guys just had a look at sawgrass link looks like iam going to have to put 2 computers on there is that much to follow ha ha

done mine the other week, with windows 8 so no powerdriver, apart from that get yourself a cuppa and take your time shouldn't be too difficult .

just opend the box there is 4 cartridges in there on the wrapping there is no makers name on iam guessing the supplier has swapt them but now closed anybody know how i can tell if they are the sub ones or ricoh dont want to mess up on stage 1 ha ha

steve 1;62150 wrote:just opend the box there is 4 cartridges in there on the wrapping there is no makers name on iam guessing the supplier has swapt them but now closed anybody know how i can tell if they are the sub ones or ricoh dont want to mess up on stage 1 ha ha

Best be on the safe side and call the supplier.....if they are not sub inks you'll be making a costly error.

thanks roger good advice

Where did you buy the printer from?
Some take the old inks out some leave them in, usualy says on their website