Page 1 of 1
Re: t shirt printing
Posted: 25 Feb 2012, 12:17
by jase121
hi i already do mug printing and have decided to give t-shirt printing a go i was just wondering what i would need & if there is some where i can get the products from cheap. as i am only looking on ebay and that does not leave much for profit
thanks for any help
Re: t shirt printing
Posted: 25 Feb 2012, 12:35
by John G
If you're already sublimating, get a heat press and use sub t shirts. If you're on a tight budget then it'll definitely be ebay as good quality (named) heat presses are an arm and a leg!
Re: t shirt printing
Posted: 25 Feb 2012, 18:21
by jase121
ok thanks can i use any type of cotton tops or does it have to state sublimation tops
Re: t shirt printing
Posted: 25 Feb 2012, 19:32
by bms
jase121;41104 wrote:ok thanks can i use any type of cotton tops or does it have to state sublimation tops
Subimation garments aren't cotton. The inks won't bond with cotton and will look very faded.
Re: t shirt printing
Posted: 26 Feb 2012, 00:26
by pisquee
Wherever you source your blank t-shirts from (whether a specific sublimation supplier or your local Primark) they will need to be polyester, and not cotton.
Re: t shirt printing
Posted: 26 Feb 2012, 08:32
by John G
Basics of sublimation - you can only sublimate onto polyester or a high content of polyester.
Re: t shirt printing
Posted: 26 Feb 2012, 14:40
by jase121
thanks for your help can i use the same paper of my mug printing for t-shirt printin
g
Re: t shirt printing
Posted: 26 Feb 2012, 14:54
by John G
Yes you can but some papers offer a higher release which will give your colours more depth - not sure of the name of the best paper
Re: t shirt printing
Posted: 26 Feb 2012, 16:41
by jase121
thanks for your help m8