Page 1 of 1

Re: Bone China Mugs

Posted: 27 Jan 2024, 09:57
by Tania
I have wasted huge amounts of money trying to sublimate bone china mugs, I have bought a new
mug press and tried about another 40 mugs, some good, some not!
Looking through the forum and the different methods of doing them, has anyone come up with a
a full proof answer.

Or is there anyone on the forum who could do them for me, they would be in batches of probably 20- 40
at a time, different designs.

Thank you.

Tania

Re: Bone China Mugs

Posted: 27 Jan 2024, 11:26
by pcwizme
Personally all I only ever use my oven for bone china. I have never had much success with pressing them

Re: Bone China Mugs

Posted: 27 Jan 2024, 17:55
by Tania
pcwizme;153518 wrote:Personally all I only ever use my oven for bone china. I have never had much success with pressing them
What type of oven please ?

Re: Bone China Mugs

Posted: 28 Jan 2024, 08:50
by UK Printed Mugs
Hello Tania. We mostly print bone china at the moment and use a bank of mug presses. More than happy to print for you but if it helps then the mug presses we use are the Genie III with the 6-8oz wrap: https://www.listawoodtradesupplies.com/ ... id=&pgnum=

Re: Bone China Mugs

Posted: 28 Jan 2024, 11:20
by pcwizme
Errr, mine was second hand from one of the users here but its the same as the one sold by the company we dont mention

Re: Bone China Mugs

Posted: 01 Feb 2024, 19:54
by Tania
UK Printed Mugs;153521 wrote:Hello Tania. We mostly print bone china at the moment and use a bank of mug presses. More than happy to print for you but if it helps then the mug presses we use are the Genie III with the 6-8oz wrap: https://www.listawoodtradesupplies.com/ ... id=&pgnum=
Hi

Thank you, I will give it one more go in an over if I fail, I will get back to you with an order .

Re: Bone China Mugs

Posted: 19 Feb 2024, 12:55
by Tania
UK Printed Mugs;153521 wrote:Hello Tania. We mostly print bone china at the moment and use a bank of mug presses. More than happy to print for you but if it helps then the mug presses we use are the Genie III with the 6-8oz wrap: https://www.listawoodtradesupplies.com/ ... id=&pgnum=
Hi Thank you for your reply. I am not sure why I am having so much trouble, I used to be able to print the mugs ok, I purchased a new mug press with a variety of blankets, the photograph of the mug press in Listawood looks identical to the ones I have. Can you tell me does the plus fitting have prongs or holes please. If I get another mug blanket it might be better. I tried the over and failed !