Re: Heat Tape Marks After Pressing Glass Photo Block
Posted: 21 Dec 2017, 19:07
Hi could anybody please give me some advice on what might be wrong with Heat Tape Marks Being Left after pressing .
I have been pressing Glass Photo Blocks
at 200 degrees Celsius for seven minuets as instructed, but after pressing I have noticed that the tape marks are appearing on the blank after the paper has been removed .
I have shown an example of what I mean in the pictures .
I wondered if it might have anything to do with the heat tape needing replacing as it is quite old, or failing that lowering the temperature on the press?
I just wondered if anybody has experienced the same thing and have some advice as to what I might be doing wrong
I have been pressing Glass Photo Blocks
- vB_ID:4968
- 20171221_180327.jpg (86.93 KiB) Viewed 7 times
- vB_ID:4968
- 20171221_180327.jpg (86.93 KiB) Viewed 7 times
I have shown an example of what I mean in the pictures .
I wondered if it might have anything to do with the heat tape needing replacing as it is quite old, or failing that lowering the temperature on the press?
I just wondered if anybody has experienced the same thing and have some advice as to what I might be doing wrong