Page 1 of 2
Re: printed heat transfers from sinotransfer - samples
Posted: 22 Nov 2010, 20:32
by Kaz
Meant to ask, did you ever get those transfers from sinotransfer?
And are they any good?
Thanks
x
Re: printed heat transfers from sinotransfer - samples
Posted: 22 Nov 2010, 20:53
by Paul
yes I do have them. i tryed one! Look VERY good but did not test them in the wash yet.
I can send some samples as got few of them

Re: printed heat transfers from sinotransfer - samples
Posted: 22 Nov 2010, 22:18
by Paul
I edit the title so more prople know what we on about

any way... if any one want some sample print I am more then happy to post for a try. just give me a shout.
APPLICATION:
temp: 150C
time: 8sec.
cold peal
Re: printed heat transfers from sinotransfer - samples
Posted: 22 Nov 2010, 22:29
by AdamB
sorry Paul - it's been that long (I can't even remember yeterday!).
Are the samples for gaments? and can they go on dark garments?
I think I remember you sticking up a picture of a logo or something ........... be interested to know how the wash and dry test goes?
Adam
Re: printed heat transfers from sinotransfer - samples
Posted: 22 Nov 2010, 22:33
by Paul
hi. yes. for dark garments too

look like a sticker on the film but look verry PRO! can send few samples as I have few smll designes sent.
Re: printed heat transfers from sinotransfer - samples
Posted: 22 Nov 2010, 23:34
by AdamB
Paul wrote:hi. yes. for dark garments too

look like a sticker on the film but look verry PRO! can send few samples as I have few smll designes sent.
Brilliant mate, PM sent matey

Re: printed heat transfers from sinotransfer - samples
Posted: 23 Nov 2010, 09:39
by Kaz
Thanks Paul
Have sent a PM

Re: printed heat transfers from sinotransfer - samples
Posted: 24 Nov 2010, 09:02
by mrs maggot
as they were sent as samples you wont have had a customs invoice, beware only printed transfers qualify for the lower import duty, if they are on anything other than paper, you may have a higher than expected bill.
have you priced up the same transfer in the uk ?? just curious to see what cost savings you are getting - and trying to work out the import charges / hassle if they are wrong/off shade vs using a uk supplier
Re: printed heat transfers from sinotransfer - samples
Posted: 24 Nov 2010, 09:16
by AdamB
so, if you had an order for ............. say 500 A4 sheets (each with a transfer) would that incur a HUGE import charge?
Re: printed heat transfers from sinotransfer - samples
Posted: 28 Nov 2010, 11:40
by Paul
Ok. sorry people! I forgot all aout this topic

I still got some small samples so if any one wish to try one out hen drop me pm with your address and I stick one to the envelope and post it to you.