DSF

Posted: **01 Nov 2017, 19:31**

Hi all.
Having recently incinerated a slate and toasted a mouse mat.......I thought I would seek advice from those who know. Could you please advise me on the following.
I need to know the temps and times for; Jigsaw puzzles, MDF coasters, Cork coasters, Glass coasters, Mouse mats (3mm & 5mm), the metal inserts for iphone covers and key rings, slates, cushion covers and, finally, Christmas stockings

Mucho thanks in advance

Dave

Posted: **01 Nov 2017, 21:53**

Check with the company you bought from as they usually give their times and temps on their web site different company's may very in times and temp.

Posted: **01 Nov 2017, 22:51**

There are quite a few variables as Reg says, and most companies have some great charts you can print off, here is a general guide from Sawgrass, but as they say you are best following your suppliers times/temps as they know their products the best
http://www.sawgrassink.com/Sawgrass/med ... _Chart.pdf

Posted: **01 Nov 2017, 23:07**

When setting temperatures make absolutely sure your press is switched to either the Fahrenheit or Celsius setting. Mistaking Fahrenheit for Celsius will definitely fry your items!

Posted: **02 Nov 2017, 23:04**

Thanks Reg...much appreciated.

Posted: **02 Nov 2017, 23:05**

Hi. really appreciate the advice and guide. I'll do that.

Posted: **02 Nov 2017, 23:07**

Great advice.....I actually did that today...luckily it was the other way round...200f rather than 200c....got there in the end

. Thank you

DSF

Temperatures and times

Re: Temperatures and times

Re: Temperatures and times

Re: Temperatures and times

Re: Temperatures and times

Re: Temperatures and times

Re: Temperatures and times

Re: Temperatures and times