DSF

Anyone attempted to make a large (A0/A1) none slip mat for cutter?

Use any plastic mats you think will be suitable (try IKEA etc) and spray them with 3M ReMount repositionable spray (green can).

Nice one! I'll give it a go!

webtrekker;123363 wrote:Use any plastic mats you think will be suitable (try IKEA etc) and spray them with 3M ReMount repositionable spray (green can).

KeyzerSoze;123397 wrote:Nice one! I'll give it a go!

A tip: DON'T use cheap spray from ebay! They tend to 'string' badly and are useless for re-sticking cutting mats. The 3M spray, although not cheap, is a very smooth, fine, spray and ideally suited for the purpose. You get a decent run between sprayings and one 400ml can lasts a good while.

I don't need A0 or A1 size so use kids Messy Mats which are available dead cheap on the net. They are very flexible, have a printed grid, and are so cheap you could just throw them away rather than keep re-sticking them.