Page 1 of 1
Re: Door hangers
Posted: 21 Nov 2015, 21:51
by A11kns
I've printed a could of door hangers but when they cool they warp a little. Noting too bad, but not flat.
Could this be too high temp? Or do I need to cool them a different way?
Re: Door hangers
Posted: 21 Nov 2015, 22:15
by scotty44
Something heavy and metal (metal to take out the heat quicker) placed on top right after pressing may help?
Re: Door hangers
Posted: 01 Dec 2015, 12:00
by A11kns
scotty44;106517 wrote:Something heavy and metal (metal to take out the heat quicker) placed on top right after pressing may help?
I'll give that ago!
Re: Door hangers
Posted: 28 Mar 2016, 20:12
by A11kns
Hong to revisit this soon. Anyone had any other experience of these? Going to try everything.
Re: Door hangers
Posted: 28 Mar 2016, 20:24
by socialgiraffe
Not sure which ones you are printing, but I recently did a couple that came from Coralgraph. Followed their pressing guide exactly and was really pleased with the result. Printed on Ricoh using Sawgrass inks and an Atkins press.
Placed them on a cold sheet of glass as soon as I took them off the press.
Sent from my iPhone using Tapatalk