Re: My tips for printing ceramic xmas tree ornaments
Posted: 17 Nov 2015, 16:58
I printed about 4 of these before I got it right and just wanted to share my info
Clam press
195 degrees
5 minutes
5 mins cooling time
Keep in in the centre on the press bed, press light to medium pressure, once five minutes is up open press and leave cooling on press bed for extra five minutes before attempting to move or remove paper, this helps it not to crack
hope this helps
Sent from my A0001 using Tapatalk
Clam press
195 degrees
5 minutes
5 mins cooling time
Keep in in the centre on the press bed, press light to medium pressure, once five minutes is up open press and leave cooling on press bed for extra five minutes before attempting to move or remove paper, this helps it not to crack
hope this helps
Sent from my A0001 using Tapatalk