DSF

Hi to all. I have been reading some of your posts for some time now, reading all I can before I take the plunge and invest in some equipment to put my own artwork on.
I have already learned a lot from all of your posts, but the thing that I can't seem to find out, perhaps not possible to know, is how much ink you use making a mug.
It seems that the ink is the most expensive ingredient in the whole mix, and am wondering how many mugs you can print, assumimg you had a full colour image over full surface- from the 100 ml bottles of ink which seem to be the standard size, or maybe it is 125ml, that are about £60 each.
thanks for any info you can share.
Geoff

Welcome to the forum Geoff. Probably better to post your question in a different part of the DSF, but as a guide an A4 sheet full colour would cost around 60p - a mug 1/3 or less. You should get well over 1000 mugs from a full EasyFlow system.

Hello Martin,...thanks for your reply. Yes, I realised as soon as I had posted that it was in the wrong place...DOH!

Welcome on board!

Hi mandy,...thankyou

Hi Geoff and welcome to the Forum! Good to have you onboard.

Justin
DSF Admin

Thanks Justin. This really is a great forum, very informative, learned loads already, but still need to learn loads more.

Hi Geoff and welcome on board

Thanks Kaz

Hi Geoff, welcome to the forum.