DSF

Not done any in so long!!!

What are the heat press settings for printing to t-shirts?

The paper is Xpres XP4072A - When I click for details on the Xpres website - nothing happens for me!

Cheers

John

Would it not be wise to check the suppliers website to see if they give guidelines for the settings?

Would it not be wise to check the suppliers website to see if they give guidelines for the settings? BMS suggest [TABLE]


[TR]
[TD="class: cell-center]190 Degrees C
[/TD]
[TD="class: cell-center]Medium/Firm
[/TD]
[TD="class: cell-center]60-70 Seconds
[/TD]
[/TR]


[/TABLE]

Thanks both,

edited my original post with paper details - unfortunately the Xpres website isn't working properly for me!

Cheers

John

Sorry was trying to be helpful, and messed up the message! Ho hum, must not print mugs and reply to forum at same time, beeeeep, ebeeep

Hahahahaha, no probs. Someone stood over me waiting for his shirt!

Done now and came out good @ 70secs 180c

Thanks

john

The subli soft shirts are 200 deg for 60 sec

A11kns;102659 wrote:The subli soft shirts are 200 deg for 60 sec

Thanks for that,

Someone turned up with one of those high wicking 100% polyester shirts - I'm guessing the same settings?

Cheers

John

Was it and Xpres Subli -T Sta Cool T. ?
If so The settings Xpres recommend are 200 Degrees and 30 seconds with light pressure.

Cheers

Kath

It was just an 'off the shelf' 100% poly shirt. The paper was by Xpres.