Sublimation Slates - anywhere in the UK?

[bms]

If anyone wants these then pm me with quantity wanted and I'll make sure those are reserved for you. As soon as they come in then I'll post on here and then the order can be confirmed online if there is still free stock available. Might even have the new website up and running by them

[photoscape]

martin, if i place an order online is payment taken now or when they come in stock? i want to make an initial order of 10

if they all sell out how long will it take for the next shipment to come?

[bms]

You can order online anytime, but the card will be charged when we process the order during the day or next day if overnight. As for replacement stock - we'll have to see what the feedback is on these and take a view as to what we order. If they all go too quickly then there will be a delay of several weeks, but I hope that doesn't happen. Don't panic buy all the stock!

[Elaine_Zang]

Hello, everybody,
i am glad the products of our sublimation slate & polymer mug are talked by your guys here.
Will be helpful if you have any question about...

[bms]

Photo Slates are in stock on Monday - I have stock reserved for those that pm'd me and you can complete any order online now for these. There is free stock from the delivery coming in to us so I'll keep these reserved until the end of the week and if you order then fine otherwise they'll be released into free stock.

[Kaz]

Have just ordered 5 to try them out

[Andrew]

Hi Martin. If I place an order now for other stuff and add on some slates will it all got out Monday or would it get knocked over to Tuesday?

[bms]

Hi Martin. If I place an order now for other stuff and add on some slates will it all got out Monday or would it get knocked over to Tuesday?

Should go out on Monday for you. The Slates are being delivered to us on Monday and Goods In/ Goods Out are in the same place so the warehouse will pack them to go out on Monday.

[Andrew]

Tried my first one...... not sure what I think yet. Didn't have much time to fiddle with a design and used a black and white image. Probably should have given colour a whirl. Did the typical man thing and didn't bother to check instructions for time either. There was a fair bit of overspray on the coating dropping onto the slate edging which doesn't give as good a finish as I would like. I will possibly place some silicone in between the press and slate next time as well as there were markings left from contact but this is possibly on the high points on the slate (not that they were uneven). I will print a few more over the next day or so to see how they go.

[Andrew]

Wow, just checked the timings..... 6 minutes seems way to long. Did you try at this yourself Martin or was it an advised time? I know the thicker glass is around that time but that was face down so heat travelling through the material.