Page 3 of 3
Re: Mugs from BMS - Very pleased :-)
Posted: 23 Jan 2014, 10:20
by RogerC
I'm so glad you didn't show the 'fuzzy bits'....
Re: Mugs from BMS - Very pleased :-)
Posted: 23 Jan 2014, 10:58
by danno
Scotty@BMS;82595 wrote:You may just be experiencing a bit of overspray. Seen that a lot on desktop Epson printers.
Yeah could be, I'm not overly concerned,they look good, I might be expecting too much
Re: Mugs from BMS - Very pleased :-)
Posted: 23 Jan 2014, 17:13
by phoenixalpha
If you do a five perfect squares (each one 100% - one of 100% cyan, 100% magenta, 100% yellow and 100% black and then a 5th of 100% in all four colours) in something like Illustrator or a vector program and print that out onto the paper, that will show you if you have overspray or if its the image. A vector image should have a perfect reproduction.
Re: Mugs from BMS - Very pleased :-)
Posted: 24 Jan 2014, 05:43
by danno
phoenixalpha;82621 wrote:If you do a five perfect squares (each one 100% - one of 100% cyan, 100% magenta, 100% yellow and 100% black and then a 5th of 100% in all four colours) in something like Illustrator or a vector program and print that out onto the paper, that will show you if you have overspray or if its the image. A vector image should have a perfect reproduction.
Ok mate I'll give that a go and see what results I get.