Re: HELP wanted - anyone got a spare DF1 Mug press for parts?
Posted: 29 Oct 2011, 10:38
Thanks PaulPaul;32748 wrote:Blanket fited on the picture is same as on my one............
DSF
Not Just Sublimation
https://dyesubforum.co.uk/
HELP wanted - anyone got a spare DF1 Mug press for parts?
Page 3 of 4
Re: HELP wanted - anyone got a spare DF1 Mug press for parts?
Posted: 29 Oct 2011, 10:41
My.other press had a metal bar that was holding blanket. It was much better and without shrp corners. Solid iron bar it was
Re: HELP wanted - anyone got a spare DF1 Mug press for parts?
Posted: 29 Oct 2011, 10:50
sorry adam id just read a post of justins thats how this flippin printers got me , to answer your queston paul no print at all on a test page i'll try your suggestion adam with the google searchAdamB;32749 wrote:Thanks Brett - just wanted to make sure
Have you tried printing out just a cyan colour test to hopefully release the clog? Google Cyan Colour print test and then you'll just be using that colour to print and not wasting any ink from the other colours.
I had a bad blockage in my 1400 a few months ago and got some kit from ebay that I drop a few drops on the head every now and then to clear it - I was suprised how much ink was around that location!
Oh, and it's Adam mate
Re: HELP wanted - anyone got a spare DF1 Mug press for parts?
Posted: 29 Oct 2011, 10:54
Re: HELP wanted - anyone got a spare DF1 Mug press for parts?
Posted: 29 Oct 2011, 10:57
Ive found that already ive printed 3 sheets and its just a washed out blue i suspect a bit of light cyan is giving the only colour thats there its the dark cyan i cant get to print
Re: HELP wanted - anyone got a spare DF1 Mug press for parts?
Posted: 29 Oct 2011, 11:26
Have you got some head cpining solution in doors buddy?
Re: HELP wanted - anyone got a spare DF1 Mug press for parts?
Posted: 29 Oct 2011, 11:30
well its fast beginning to look like a new printer and i got a bloodyt tray full of orders typical
Re: HELP wanted - anyone got a spare DF1 Mug press for parts?
Posted: 29 Oct 2011, 11:30
no i havnt paul to be honest i wouldnt know what to do with it
Re: HELP wanted - anyone got a spare DF1 Mug press for parts?
Posted: 29 Oct 2011, 12:05
get some of ebay. Zap is good. If you get it i will direct you. Is simple and 99% effective.
Re: HELP wanted - anyone got a spare DF1 Mug press for parts?
Posted: 29 Oct 2011, 13:09
Right SOME ZAPP ORDERED now then im in desperate need of some photos printed on a4 paper for pressing onto place mats can anyone help with this to get me out of a hole ?