DSF

So....anyone going to own up...who bought it?

smo;70604 wrote:So....anyone going to own up...who bought it?

OK I will start it off. It wasn't me. only another 2 thousand members to go. lol

Jack

To be honest, I wish I'd discovered this forum 5 years ago when I started dye subbing myself. It would have answered loads of questions that I spent hours researching, and I would have had friends in common.

I am moving on to realise an ambition of cooking for a living. Opening a wine bar serving food with a Scandinavian influence. Very different, and I can't wait!

smo;70604 wrote:So....anyone going to own up...who bought it?

Well, my lips are sealed, but I'm sure you'll find out very soon.

In the imortal words of the great poet that is toyah "it'sth a mysthtry"

smo;70604 wrote:So....anyone going to own up...who bought it?

ok guilty as charged im am now the proud owner of mybiggerpicture.com with an feckin huge epson 9400 and a feckin huge geoknight press and an even huger heatjet roller press

purpledragon;71814 wrote:ok guilty as charged im am now the proud owner of mybiggerpicture.com with an feckin huge epson 9400 and a feckin huge geoknight press and an even huger heatjet roller press

Didn't think you could keep quiet Brett!

We have the same heatjet model ... am struggling to get it up and running though (had for a few weeks) as it keeps tripping the RCD - firstly the 30mA one on the main ringmain, then I rewired in its own 16 amp feed, so it was fed fromthe main incomer which still had an RCD, although rated at 100mA, and in doing this meant I could keep it running for 5 minutes, rather than 5 seconds I got on the 30mA - we're now considering having to buy a generator to run it, as I am uncomfortable doing too much rewiring as we're only renting!

purpledragon;71814 wrote:ok guilty as charged im am now the proud owner of mybiggerpicture.com with an feckin huge epson 9400 and a feckin huge geoknight press and an even huger heatjet roller press

Pipped me to it!!

Congrats on the purchase (you just became public enemy number 1 )

pisquee;71833 wrote:We have the same heatjet model ... am struggling to get it up and running though (had for a few weeks) as it keeps tripping the RCD - firstly the 30mA one on the main ringmain, then I rewired in its own 16 amp feed, so it was fed fromthe main incomer which still had an RCD, although rated at 100mA, and in doing this meant I could keep it running for 5 minutes, rather than 5 seconds I got on the 30mA - we're now considering having to buy a generator to run it, as I am uncomfortable doing too much rewiring as we're only renting!

had exactly the same problem i had to get sparky to wire from mains a new dedicated 32amp fuse board in my work shop. Running a treat now