Page 2 of 2
Re: Epson B1100 - not printing at all
Posted: 12 Aug 2011, 11:07
by R.Prints
The reason I asked about the lid is because I found that the B1100 must have a microswitch fitted cos if you lift lid when printing the printer will stop, then start again when you close lid, unlike the R1800's I had previously where you could leave the lid open.
Re: Epson B1100 - not printing at all
Posted: 13 Aug 2011, 22:39
by Paul
R.Prints;28125 wrote:The reason I asked about the lid is because I found that the B1100 must have a microswitch fitted cos if you lift lid when printing the printer will stop, then start again when you close lid, unlike the R1800's I had previously where you could leave the lid open.
good poin. here its how to overcome this problem
use one of the rubber ciss plug
