Re: Printing on MDF plaques
Posted: 22 Nov 2012, 15:09
Your more than welcome Adrian. I use it mainly when I'm printing metal plaques as it means I can do quite a few at a time without all the fiddling with heat tape.
One tip I forgot to mention that I use is always have some paper towel with some white spirit so, you can remove any adhesive spray residue whilst still hot. You can still remove it when cold but, it is a lot easier when hot.
One tip I forgot to mention that I use is always have some paper towel with some white spirit so, you can remove any adhesive spray residue whilst still hot. You can still remove it when cold but, it is a lot easier when hot.