Page 2 of 2
Re: recommendation for new vinyl cutter
Posted: 17 Feb 2021, 23:00
by Mrteajunkie
colebag;147372 wrote:graphtec I will have a look ash those do they make a 24" as I'm going to be making large vinyls so needs to be that as minimum really as cant manage with my 12" one any more
yes 14” is the smallest they make.
Re: recommendation for new vinyl cutter
Posted: 17 Feb 2021, 23:35
by colebag
Will look now what they do then
Re: recommendation for new vinyl cutter
Posted: 18 Feb 2021, 21:27
by pw66
If you are on a budget then Grafityp stock the GCC range of cutters, which are a bit cheaper, as well as the Roland GS24.
https://www.grafityp.co.uk/vinyl-cutters
Re: recommendation for new vinyl cutter
Posted: 19 Feb 2021, 00:50
by colebag
I like the look of the Roland one are they a good cutter
Re: recommendation for new vinyl cutter
Posted: 19 Feb 2021, 09:27
by Fletcher
Hi, I have a Pixmax 28" cutter. I use vinyl master software with mine and its been great for years. Its now 3-4 years old I think.
Re: recommendation for new vinyl cutter
Posted: 19 Feb 2021, 12:45
by froggy
colebag;147307 wrote:what make is the summa or is that the make will it run with a Mac
Summa is the brand, starts with 610 wide goes upto 1600 used 60D should be around £3-400 runs of sumacut software (which is free) not sure if it runs with a mac, but I would imagine so