did you pressed them with medium/heavy preasure? i had yellow/green cast when I press items not heavy enough.
But if colors are close it mean you need profile for your inks. and can be done. worth to try to save your ink and get some use of ink you already have.
Probs with new B1100!!
Re: Probs with new B1100!!
Hi Paul,
Yeah, pressed them with med-heavy pressure!!
Desperately trying to get funds together for the BMS CISS system!! Maybe a week away
Regards,
Barry.
Yeah, pressed them with med-heavy pressure!!
Desperately trying to get funds together for the BMS CISS system!! Maybe a week away
Regards,
Barry.
Re: Probs with new B1100!!
right. so if you planing to get new ciss then is worth to give up with this ink as you wasting your blanks now 
just wait for the new ciss and start printing stright a way 
(hopefully)
just wait for the new ciss and start printing stright a way (hopefully)http://www.howtoprintstuff.co.uk <-- How To Print Stuff BLOG
Re: Probs with new B1100!!
Yeah, I think that's what we're gonna do !!
In the meantime is there ANYONE who's be prepared to print images onto A3 for me until we get back up and running?
We'll send the images on cd which will simply need printing.
All costs will be remunerated.
Obviously prefer someone local (NE England) but any locale would do.
Thanks,
Barry.
In the meantime is there ANYONE who's be prepared to print images onto A3 for me until we get back up and running?
We'll send the images on cd which will simply need printing.
All costs will be remunerated.
Obviously prefer someone local (NE England) but any locale would do.
Thanks,
Barry.
Re: Probs with new B1100!!
Just ordered the new CISS system from YKW!! along with some "decent" paper 
Hope it arrive tomorow. Could be outa the box, fitted and running in record time
As I've found out to my chagrin, "ya gets what ya feckin' pays for". Pay for cr*p and you get a load of horse sh*te
At least with my new supplier, he can supply a shovel if it all turns pear shaped
Barry.
Hope it arrive tomorow. Could be outa the box, fitted and running in record time
As I've found out to my chagrin, "ya gets what ya feckin' pays for". Pay for cr*p and you get a load of horse sh*te
At least with my new supplier, he can supply a shovel if it all turns pear shaped
Barry.
Re: Probs with new B1100!!
LOL who is YKW??
who is YKW??http://www.howtoprintstuff.co.uk <-- How To Print Stuff BLOG
Re: Probs with new B1100!!
LOL!!! whitch mean??
http://www.howtoprintstuff.co.uk <-- How To Print Stuff BLOG
Re: Probs with new B1100!!
OK, it's arrived 
Fitted like a dream. (ok, the orange light came on but a cartridge reset fixed that, as per instructions)
1st (and only) nozzle chech, spot-on
Profile etc installed
1st and subsequent prints.....WA-HOO
All credit to BMS and all the staff there. They seem to go that extra inch.
After months, nay years of faffing around with a 1290 then a 1400 using "Brand X" inks we're now up and running better than ever before.
Barry
Fitted like a dream. (ok, the orange light came on but a cartridge reset fixed that, as per instructions)
1st (and only) nozzle chech, spot-on
Profile etc installed
1st and subsequent prints.....WA-HOO
All credit to BMS and all the staff there. They seem to go that extra inch.
After months, nay years of faffing around with a 1290 then a 1400 using "Brand X" inks we're now up and running better than ever before.
Barry
Re: Probs with new B1100!!
LMAObazwalt wrote: After months, nay years of faffing around with a 1290 then a 1400 using "Brand X" inks we're now up and running better than ever before.
Barry
http://www.howtoprintstuff.co.uk <-- How To Print Stuff BLOG
Who is online
Users browsing this forum: No registered users and 1 guest