http://farbtoner.com/refilltoner-white- ... -6936.html
As you can see from this link , the price is a quarter of buying a replacement toner cartridge for the OKI 711 white printer
But....would you buy this?? ( and the reset chip) . I wouldnt want to mess up an expensive printer just to save 300€.
Refil for Oki White.
-
Earl Smith
- Posts: 1323
- Joined: 18 Jan 2012, 09:17
- Contact:
Re: Refil for Oki White.
I bought 3rd party toner for my regular CMYK Oki printer, - about 40% of manufacturers price, and decided not to do it again.
It takes hundreds or even thousands of prints before the 'new' toner finally gets to paper bacause there is loads in the image drum unit already.
No conclusive evidence, but the print quality seemed to deteiriorate, and life of image drum only about 1/3 of what Oki suggest you should achieve.
I personally will not but 3rd party even for my low cost C610, and definitely not for my 711w
But love to hear others thoughts.
Phil
It takes hundreds or even thousands of prints before the 'new' toner finally gets to paper bacause there is loads in the image drum unit already.
No conclusive evidence, but the print quality seemed to deteiriorate, and life of image drum only about 1/3 of what Oki suggest you should achieve.
I personally will not but 3rd party even for my low cost C610, and definitely not for my 711w
But love to hear others thoughts.
Phil
1 Hour T-shirt printing shop in Newcastle upon Tyne.
http://www.logobear.co.uk/
Logobear t-shirt print and embroidery. 74 Clayton Street. Newcastle. NE1 5PG. UK
http://www.logobear.co.uk/
Logobear t-shirt print and embroidery. 74 Clayton Street. Newcastle. NE1 5PG. UK
-
socialgiraffe
- Posts: 4597
- Joined: 16 Jun 2011, 23:40
- Been thanked: 1 time
- Contact:
Re: Refil for Oki White.
I purchased a third party white and will never do it again.
Firstly, the white is considerably weaker than the OKI white, secondly the toner does not adhere to products as well as the OKI toner. For example, with OKI white you can print metal water bottles without the worry of the ink scratching off. Third party toner seems to fall off even if you blow on it!
Firstly, the white is considerably weaker than the OKI white, secondly the toner does not adhere to products as well as the OKI toner. For example, with OKI white you can print metal water bottles without the worry of the ink scratching off. Third party toner seems to fall off even if you blow on it!
USING: Whatever it takes to get the job done...
Who is online
Users browsing this forum: No registered users and 1 guest
