Where in the UK do you get the emulsion from do you know a good palce ?

thanks

Paul

<t>no not really looked in to that deeply, I will however go the way of emulsion screens, and printing out onto transperncy films and see how that goes but thanks for the reply though I have tried a lot of way to get the vinyl to stay on the mesh screen but failed even with low tack app tape so ...

<t>Morning guys just a quickie, I am trying to print a stencil using vinyl then applying it to my screen print frame/mesh but after applying my application tape to the vinyl to remove the vinyl backing, then sticking it onto my mesh fram etc, I try pulling the Application tape of but the vinyl comes ...

<t>Morning guys just a quickie, I am trying to print a stencil using vinyl then applying it to my screen print frame/mesh but after applying my application tape to the vinyl to remove the vinyl backing, then sticking it onto my mesh fram etc, I try pulling the Application tape of but the vinyl comes ...

okay thanks guys I am printing onto truepix sublimation paper onto 100% polyester shirts. I did try to print onot 50/50 % poly - cotton shirt but it turned out to be dull abd crap print
I set the heat pres at 180 c for 50 seconds but I guess its trial and error

<t>Hi guys just a quickie to ask what temps and times are peolpe using to print from a SG3110 DN printer onto a heat press i had the correct temp once as it printed a perfect picture but then cant remember <br/>
the settings again. any help would be great thanks <br/>
<br/>
Paul <br/>
<br/>
I am ...

<t>hi guys thanks for the replies, all software is updated and Cameo people have told me to reboot my computer and reinstall the cameo software with the updated code for the software, and then go from there so did that last night and after a few mis cuts it all seems to be ok so far and cutting as ...

<t>Hi guys, I have had my cameo cutter for about 2 years now and its never let me down.., untill a week ago, when I turned it on and after its say load/unload matt etc then, after about 2 seconds it says working, <br/>
now there is nothing on screen yet to cut or not been sent to the cutter ?? I ...

Yes thanks guys could look at getting the Aluminium backing and then the Acrylic/perspex all cut to size will look into this a bit more I think, and like you I was once a delivery driver and noticed these every where

Yes thanks guys could look at getting the Aluminium backing and then the Acrylic/perspex all cut to size will look into this a bit more I think, and like you I was once a delivery driver and noticed these every where