I'm using the Adkins Magic Touch swing press.
I press 6 coasters at a time and can get 6 perfect ones and then all 6 will be the desaturated brown on the next batch.

<t>Hi guys, wondering if you can shed any light on this.<br/>
I made a large order using the Xpres hardboard coasters. The prints were all fine (clean heads, same paper etc) press time/temp/pressure the same, but got a different result on some coasters. As you can see in the pic, the right coaster ...

Thanks a lot for your reply Ray, very helpful!

I got some sample sheets of Versa paper when i bought the printer so will give that a go next time i need to do coasters.
Other than this curling problem, i'm very happy with the printer so far.

Cheers
Matt

<t>Hi guys, I'm printing 6 9x9cm coasters per A4 sheet. At the top and bottom of the page I'm getting scuffs where the paper curls up a little once printed and clips the print head. Attached a picture of the problem. I'm using/tried:<br/>
<br/>
Ink Experts Style paper<br/>
Set High Speed to 'off ...

<t>I did 195 degrees, 65 seconds. Same on both sides but let them fully cool between presses. No burning, blurry print or change in colurs to the existing printed side. <br/>
Found out I got a much better result pressing the back of the bar blade with the sublimation paper on the bottom. Full ...

Thanks for your help guys. Had a day of mug and bar blade printing/pressing and it was very successful thankfully!

Great thanks John. I'll give them a go tomorrow and see how they turn out.

Hahah thanks for that! I'm anticipating a whole new set of problems doing them

<t>Hi guys, just wanted a bit of guidance with regards to the metal bar blade bottle openers. Purchased from Isub Supplies and printing on both sides is possible on them. <br/>
<br/>
1. Should I print both sides at the same time or one side at a time? I'm guessing one side at a time is preferred as ...

Awesome, thanks that!
Going to spend my Saturday giving them a go. Hopefully it'll be a stress free day...